Server Service Details
- RFT Loader OTP Login For Auth [OPPO Models]
Important Notice
If you experience any issues, please contact our support team for immediate assistance. However, please note: If you have already used your OTP with the wrong PCB or encountered an unsupported issue, we cannot provide a replacement or refund.
How to Use RFT v3.5 – Step-by-Step Guide
Step 1: Have your valid OTP ready for the desired service. Step 2: Download the latest version of O+ Support or MSM Tool. Step 3: Open RFT v3.0 from the folder and enter your OTP. Step 4: Click the Login button and wait for the Flash Tool to open. Step 5: Once open, use your OTP as both username and password. Step 6: Check the connection port and load the correct firmware in the Flash Tool. Step 7: Confirm the Model, PCB, and Item Code shown in the tool. Step 8: If the PCB and item code match, enable the NV Default option. Step 9: Verify the connection port. If it’s active, click Start. Step 10: Once connected, do not interrupt the process. Wait until completion. Step 11: If the device is disconnected after authentication is successful, no refund will be issued.
Troubleshooting Tip
If the loaded file does not appear in the tool:
Close the tool.
Reopen it from the ZIP folder using the RFT Loader.
This usually resolves the issue.
OTP Usage & Refund Policy
Your OTP will expire automatically in the following cases:
Authentication successful
Wrong firmware/file used – instant loss
Disconnected during the flashing process
NV Default option not selected – instant loss
In any of these cases, refunds are not available.
Dear Customer, to get the best out of our services... Subscribe to our official Telegram Channel by clicking on the link below and don't miss out on our service updates. https://t.me/petrockunlock